This is the idea that customers consider the cost and profit when purchasing an automatic screw machine. They want a cost-effective, low-cost, high-return equipment. We analyze the purchase method for you in depth:
The fully automatic screw machine is also called an automatic nailing machine, an automatic screw tightening machine, an automatic screwing machine, a screw tightening system, etc. This is an automatic device with automatic nail feeding and locking, which replaces manual screwing. At present, many domestic companies have very broad application prospects. They are mainly used in the production of automotive parts, computers, display screens, motors, lamps, mobile phones, printers, circuit boards, batteries, electric meters, etc. Automatic assembly can greatly improve production efficiency, reduce production costs, and improve reliability.
There are many types of screw machines on the market. How can customers choose a cost-effective fully automatic screwing machine? In fact, only four steps are needed:
The first step is to check whether it can be screened: In actual production, there may be special-shaped screws such as flash, flat head, and big head. Grab the screws with various special-shaped specifications into the feeder. If the screw machine can automatically screen out special-shaped screws during operation and will not cause blockage and jamming, it means that one of the conditions for the good operation of the screw machine is met.
The second step is to check whether the material can be provided: when we do the first step, the screw machine automatically screens out special-shaped screws, and there must be a gap; if the system can be replenished in time, there will be no gap. This is the second condition of a good screw machine and also the condition of a good screw machine feeder.
The third step is to check whether floating teeth will occur. In order to make the special-shaped screws pass smoothly, some manufacturers will enlarge all channels, resulting in the misalignment of the batch nozzle and the screw cross groove, resulting in floating teeth of the locking screw and increasing defective products.
The fourth step is to check whether the paper feeding is repeated: sometimes the paper feeding is not locked, and a light touch signal will have another screw feeding, that is, double screw feeding.
The fifth step is to check whether the material shortage detector and buzzer alarm are automatically fed during automatic feeding, so that when the equipment automatically screws, it will automatically alarm when encountering material shortage and other situations to ensure the normal operation of the machine.
Therefore, when choosing an automatic screw locking machine, just follow these five steps to see whether it can automatically screen screws, automatically load materials, repeat loading, lock quality inspection, and fault alarm.
If these five steps are passed, then this is a very cost-effective fully automatic screw machine.