Common And Cost-effective Glue Dispensing Machines Currently Available On The Market.

Syringe Type Glue Dispensing Machine

Product Features
Cost-effective semi-automatic dispensing machine
Handheld programmer for easy programming and operation
Low maintenance and low usage cost
Common Applications
Thermal conductive silicone grease, heat-dissipating oil, primer, medical test tubes
Standard Configuration
3-axis or 4-axis motion, intelligent valve control
Optional Configuration
Safety guard, safety grating

Hot Melt Glue Dispensing Machine

Product Features
High flexibility: The 3 or 4 axis linkage can achieve complex trajectory gluing such as points, lines, surfaces, and arcs, adapting to a variety of products.
Controllable cost: Compared with fully automatic equipment, the tank - type design (direct use of glue cans for glue supply) saves glue waste and has a low maintenance cost.
Outstanding efficiency: It supports continuous glue supply and rapid curing, and is suitable for medium - to - high - speed production lines (such as gluing dozens of workpieces per minute).
Working Principle
The 3 or 4 Axis tank-type hot melt glue dispensing machine is a hot melt glue dispensing equipment based on a motion platform (X, Y, Z axis). It mainly heats and melts solid hot melt glue sticks/granules, and uses air pressure or mechanical pressure to extrude the glue from the nozzle to achieve precise dispensing, coating, potting, etc.
Common Applications
Electronics and electrical appliances industry, automotive manufacturing and parts, packaging and printing industry, new energy industry

AB Glue Dispensing Machine

Product Features
Simple operation: Controlled by air pressure, operators only need to set parameters such as air pressure and time to achieve automatic mixing and dispensing of glue. No complex operating skills are required.
AB glue ratio: Mainly used for 1:1, 2:1 two - tube set AB glue with a total capacity of 10ML, 30ML, 50ML.
Good mixing effect: Using mixing methods such as static mixing tubes, Glue A and Glue B can be fully mixed, ensuring the stability of dispensing quality.
Low cost: Compared with some other types of AB dispensing machines, the pneumatic AB dispensing machine has a relatively simple structure and lower cost, making it suitable for the production needs of small and medium - sized enterprises.
Working Principle
The pneumatic AB dispensing machine realizes the transportation and mixing of glue through air pressure. Specifically, Glue A and Glue B are stored in two combined tubes. The glue is pressed out of the barrels by air pressure and transported through their respective pipelines to the mixing tube. In the mixing tube, the two types of glue are fully mixed, and then the mixed glue is dispensed to the required position through the dispensing head. The dispensing volume and ratio of the glue are usually achieved by adjusting the air pressure and controlling the opening time of the valves.