The usage method of the electric screwdriver machine is as follows:
1. Preparation:
- Ensure the power supply and air source are connected, and adjust the "Automatic-Manual" button to the manual position.
- Fix the fixture on the machine installation plane, and adjust the position of the fixture according to the positioning reference (such as scale lines and positioning pin holes) on the machine to ensure that the center of the fixture is aligned with the machine processing area.
2. Quick Setup
- Screw loading: Pour the screws onto the screw feeder. Note: Based on the capacity of the feeder, load the appropriate amount of screws. The total quantity of screws must not exceed the bottom of rail.
- Coordinate preset: In manual mode, set the origin of the first screw hole position, batch collect the coordinates of all hole positions and save them as product Model files (such as "Model-X"), and load them directly when called next time. If the program has been preset at the factory according to the product, it can be called directly, no need to set any parameters.
- Parameter set: Set parameters such as torque, rotational speed, and gun lift height of the corresponding product in the machine parameters.
3. Turn on the machine and perform initial settings
After turn on the power switch of the screwdriver machine, switch the manual mode to automatic mode). Press the reset button, then place the product to be processed on the machine's station for processing.
4. Start the electric screwdriver machine
After pressing the start buttons of the left and right workstations, the equipment will drive the robotic arm to move to each screw hole position in sequence based on the preset coordinate path file and perform the locking operation. When all the points at the left workstation have completed the screw locking, the robotic arm will automatically switch to the right workstation to continue the locking process. During this period, the left workstation will start operating simultaneously: the operator can quickly remove the processed products, clean the fixtures and load new workpieces. After the operation at the right workstation is completed, the equipment will immediately switch back to the left workstation, forming a highly efficient operation mode of alternating cycle between the left and right workstations. Through this parallel operation mechanism, the equipment achieves continuous and uninterrupted production. Compared with single-workstation operation, the screw assembly efficiency is increased by more than 40%, significantly shortening the production cycle.
Act now – contact us for professional automation solutions.
Email: Johan@tbeite.com WhatsApp: 0086 14776828717
related equipment
