Which products are suitable for the air - shooting screw tightening machine?

May 08, 2025 Leave a message

Which products are suitable for the air - shooting screw tightening machine?
The air - shooting screwing machine occupies an important position in the manufacturing industry with its efficient and stable automated screw assembly capabilities. Its working process is as follows: First, the screws are orderly fed into the rail through a drum or stepped feeding device to achieve smooth alignment; then the screws are separated one by one by the material separator; finally, the blowing system uses high - pressure air flow to accurately transport the screws to the gun head of the tightening module, waiting for screwing. However, not all screws are suitable for this type of machine. The applicable products need to meet the following conditions:

 

Feeding tube

 

 

Screw specification requirements: Since the screws need to be transported to the locking nozzle in the hose, if the screws are too short, they are very likely to turn over in the hose, resulting in feeding failure. Therefore, the air - blowing screw driving machine has clear requirements for the screw length ratio. The total length of the screw needs to be more than 1.3 times the diameter of the screw cap, so as to ensure that the screw maintains a stable posture in the hose and can be transported smoothly.

 

 

 

 

Screw driver head

 

 

Product structure requirements: During the screw locking process, the clamping nozzle will open and push the screw into the product hole for the fastening operation. This requires that there should be no obstacles within 10mm around the product hole. Otherwise, it will interfere with the movement of the clamping nozzle, affect the normal screwing of the screw, and may even damage the equipment or the product.

 

 

 

 

 

 

Only products that meet both the above - mentioned screw specifications and product structure conditions can fully exert the high - efficiency and precision advantages of the air - blown screw machine and achieve automated screw assembly.

Send Inquiry

whatsapp

Phone

VK

Inquiry