What should I do if the automatic screw locking machine misses locking?

Sep 06, 2024 Leave a message

Those who know or use the automatic screw locking machine know that the automatic screw locking machine has certain automatic detection functions; for example: threshing misses locking, etc.; so how to achieve these functions? What if the automatic screw locking machine does not lock?
First of all, how do we implement this test? This question is very simple for us, because the controller we use in the control mode is controlled by PLC. When you locate, you set several points to lock several points, and there will never be a screw that is less screwed or missed.
Taking the coordinate type as an example, when the position of 30 screws is set to be automatically completed by the automatic screw locking machine, the program will automatically lock 30 screws according to your coordinate settings, and the total number on the display will show 30. Looking at the touch interface diagram above, you can see that if you set it to lock 30 screws on the left and 30 screws on the right, the color of each screw will change, and you can see at a glance whether there is a screw missing phenomenon. In the same way, the current point is how many points the automatic screw locking machine is currently locking! So as long as the machine is controlled by PLC, and then the batch is fed back to the PLC controller, and then the display touch interface and buzzer will alarm, this problem can be eliminated.

Send Inquiry

whatsapp

Phone

VK

Inquiry