1. The electric screwdriver nozzle should be kept smooth at the edge of the electric screwdriver nozzle, otherwise the screw will not be able to enter the electric screwdriver nozzle, affecting the use of the equipment.
2. The sheet metal cannot bend the screw delivery pipe, otherwise the screw will be stuck in the sheet metal bend during the screw delivery process.
3. The electric screwdriver torque must be raised after the electric screwdriver stops automatically when it exceeds the set torque, otherwise the equipment will not be able to move and deliver a screw to the electric screwdriver nozzle for locking.
4. If it is found that the machine has not delivered a screw to the electric screwdriver nozzle for locking, you can repeatedly hit the locked screw, or manually press the screw delivery button several times to let the machine deliver a screw to the electric screwdriver nozzle for locking.
5. The standard air pressure cannot be increased, otherwise it will only accelerate the wear rate of the electric screwdriver nozzle.
6. The vibration force of the rail cannot be increased, otherwise the screw is easy to squeeze the rail on the screw rail, affecting the reliability of the equipment.