The automatic screw machine is simple and convenient to operate, saving time and effort, saving a lot of manpower and time for enterprises to produce products, while improving product production efficiency, and the machine performance is also stable.
The automatic screw machine mainly completes this series of operations through automatic feeding, intelligent locking, manual placement, and machine unloading. It has high working efficiency and very clear division of labor steps. It subverts the working principle of traditional manual screw locking, and also expands the advantages of traditional handheld automatic screw machines.
Working steps:
Automatic feeding: Use automatic equipment for feeding, arrange the screws neatly and transport them to the top of the machine, and then flow into the screw distribution system, and finally send the distributed screws to the clamping nozzle by blowing.
Intelligent locking: The cutter can move up and down, left and right, front and back in the space of the table. The spindle has upper and lower limiters. Move the screwdriver nozzle to the top of the screw hole and then fix the limiter to ensure that the screw machine nozzle will not touch the product and scratch the product. After aligning the screw hole, the machine drives the cutter to press down. The screw head has a downward start function. The cutter automatically starts when the screw touches the screw hole and completes the locking. After the locking is completed, the cutter automatically stops rotating, the automatic screw machine lifts the cutter, and the screw is automatically sent to the screwdriver nozzle. The automatic screw machine moves the cutter to the next screw hole to continue screwing.
Manual placement: The worker places the product on the fixture, waits for the machine equipment to screw the product, then replaces the product, re-places the next batch of products to be screwed, and then continues the same operation.
Machine unloading: Some automatic screw machines are equipped with a robotic arm. In this way, after the automatic screw machine screws the product, the robotic arm can automatically remove the product and put it into the production line or packaging box, saving a lot of time.