1. Be able to carry out reasonable brush selection
High-quality multi-axis automatic screw driving machines can effectively select defective products. Therefore, some screws with various irregular shapes such as burrs and large heads can be selected and put into the feeder. , carry out inspection on automatic screw machines. If during the operation process, the automatic screw machine automatically selects out the special-shaped screws that do not pass the inspection and does not appear stuck, it has exceeded a standard of usability.
2. Able to carry out fully automatic feeding
Fully automatic loading and unloading, and fully automatic feeding are prerequisites for a high-quality multi-axis fully automatic screw machine. After selecting special-shaped screws, the feeder of the automatic screw machine will definitely generate a gap. This At this time, the intelligent control system of the automatic screw machine needs to replenish the material in time to clear the gap. If it can exceed this requirement, it will maintain the next standard of usability.
3. Floating teeth and repeated feeder
Increasing the feeder channel allows the screw machine to easily exceed the previous two standards. Although the special-shaped screws can be picked out directly, it will also cause the electric screwdriver to not point to the screw cross grooves, making the screws locked. Floating teeth are the cause of substandard products. When replenishing materials, there may also be situations where the previous screw has not been tightened and the other screw has been transported back. Therefore, the absence of floating teeth and repeated feeders is the third criterion for selecting a useful multi-axis automatic screw machine.
To meet these standards, not only does the manufacturer need to design a suitable solution based on people's needs, but it also needs on-site analysis and investigation to carry out effective testing of the multi-axis automatic screw driving machine at all levels. Choosing a multi-axis automatic screwing machine with good pre-sales service and service level is more conducive to people's communication and testing in all aspects when choosing an automatic screwing machine.